I have been promising to bring you my homemade feta cheese recipe for a while (Ahem, probably a couple of years. Eek.) Today is finally the day. You may be wondering why I bother making feta cheese from scratch. The answer-as is often the case- is that homemade tastes great and because I can. I am, after all, the daughter of a man who feels driven to walk laps around the house outside in blizzards when authorities warn that you shouldn’t go out unless you have to do so.
There’s an enormous satisfaction in doing something that seems just undo-able, isn’t there? Not only does homemade feta taste incredible, but it delivers a pioneer, up-by-my-bootstraps joy that a store-bought version just can’t give no matter how wonderful it is.
…But there’s another reason to take the plunge and it’s a doozy. For the cost of three gallons of milk (it can be pasteurized/homogenized or raw, cow or goat milk) and about a dollars worth of other stuff, you get a massive amount of feta cheese. As in a gallon jar of brined feta cheese. If you’re fearful of trying your hand at cheese making, just think of it this way; the risk is about twelve dollars worth of materials (depending on milk cost near you) versus a potential payoff of about forty dollars worth of cheese and an enormous ego boost. If it -bumbum BUM!!!!!- goes wrong, you can feed the errant cheese to dogs, cats, pigs, etc… They’ll be happy.
I’m going to get right into it because even if I’m being succinct, this post is going to be long on account of the how-to photos… There’s no getting around it. Some important notes:
- Stay calm! Cheesemaking is not supposed to be stressful. It may seem complicated, but it isn’t. Just go one step at a time and you’ll get there.
- Don’t get freaked out by the length of time it takes to make this. Much of the time is hands-off time. Another warning for those who haven’t made cheese or fermented something before; it gets a little, um, pungent smelling at times. Keep a-going. Don’t worry! Remember that cheese making is essentially controlling how fast and in what way milk ‘goes bad’. If it goes bad the right way it’s delicious!
- The only special equipment you really need to pull this off is a large stainless steel or other non-reactive pot, a heat source, a long knife or off-set spatula, a colander, something from whence to hang the cheese and butter muslin (extra, super, mega fine cheesecloth.) Do not confuse this with the “fine” cheesecloth you get in the grocery store or hardware store. It’s confusing terminology, but that stuff is so not fine. Just look for something called butter muslin and you’ll be fine. Finer than cheesecloth. Sorry. You can get it here.
- You can opt to use raw OR pasteurized/homogenized milk. It can be cow milk or goat milk. Any of those choices will be delicious.
- Goat milk is naturally more tangy, so if you use cow milk, you may want to consider adding a bit of lipase powder. Lipase is an enzyme that naturally occurs in higher amounts in goat milk. If you want cow milk feta to have that bite that is found in feta, lipase powder is your answer. You can get it via my beloved Amazon.com should you wish to.
- As far as specialty ingredients go, the lipase is optional, but rennet and mesophilic culture are not optional. Again? You can turn to Amazon.com. Here’s one for mesophilic culture.
- Whatever you do, don’t think Junket Rennet will do the job. It simply won’t. That’s for custard making. My preferred cheesemaking rennet is made from animal sources.
- But there is a perfectly acceptable and delicious vegetarian option…
- Finally, I suggest you start the process around lunch time. This gives you the time needed to do the Day One portion of the recipe before too late in the day.
Just think what you’d do with a gallon jar full of fabulous feta cheese. You can go nuts with feta! On pizzas, spanakopita, this tempting salad from my friend, a baked potato, in soup, in omelets, with olives and bread, IN bread, and in just about any recipe that calls for cheese. Where would you use your wealth of feta?
Homemade Feta Cheese | Make Ahead Mondays
Rate RecipeIngredients
For the Cheese:
- 3 gallons fresh raw or pasteurized and homogenized goat or cow milk
- 1/4 teaspoon Mesophilic culture see link in post for source
- 1/4 teaspoon lipase powder if using cow milk Omit for vegetarian cheese. Lipase is animal derived.
- 1 teaspoon single-strength liquid rennet dissolved in 1/2 cup of cool or 1/2 teaspoon double strength liquid OR 3/4 of a vegetarian rennet tablet crushed, UNCHLORINATED water.
- kosher salt no substitute
For the Brine:
- 1/2 cup kosher salt no substitute
- 1 gallon cool UNCHLORINATED water
Instructions
To Make the Cheese:
- Sterilize all of your equipment with boiling water before beginning (including the cheesecloth.)
- In a very large, non-reactive pot, bring all of the milk up to 86°F.-88°F. Add the mesophilic culture and the lipase powder, if you are using it. Stir well with an up and down motion, cover the pot and let rest for one hour. Try to maintain the 86°F temperature. If you have trouble with that, you can set your large pot inside a larger pot with an inch of hot water in the bottom of it. This should help regulate the temperature more gently than firing up a burner directly beneath the milk. The goal is to avoid rapid temperature changes.*See notes.
- After 1 hour, add the dissolved rennet to the milk and stir vigorously for 15-20 seconds. Remove the spoon from the pot, cover it, and let it stand undisturbed for 30-40 minutes or until the curd 'breaks' cleanly when you insert the tip of a knife and lift as shown below.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/homemade-feta3.jpg"] - Cut a 1/2-inch grid pattern into the curd. Don't get perfectionist here, you'll get frustrated. The curd likes to move while you try to cut it, so just do your best.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/homemade-feta.jpg"] - After you have the grid pattern, hold the knife at a 45° angle and retrace the cuts you've already made. This is going to make MOST of the curd in the pot into roughly 1/2-inch pieces.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/feta-in-brine.jpg"] - The ones that didn't get cut that small will break up later in the process. DO NOT STIR THE CURD YET.
- Let the curd rest undisturbed for 10 minutes.
- After 10 minutes, stir gently, breaking up any larger pieces you missed with the knife. Again, don't sweat this too much... Just try to have most pieces in the neighborhood of 1/2 an inch.
- Keep the curd at 86°F to 88°F for 45 minutes, stirring from time to time to keep the curd from sticking to itself. You'll notice the curd getting slightly firmer and smaller. This is because as you stir it and hold it at this temperature it releases more whey.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/homemade-feta-1.jpg"] - Dampen your butter muslin/cheesecloth and use it to line a large colander. I usually position the colander over another large stockpot because I like to save the whey for baking.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/homemade-feta-2.jpg"] - Carefully and gently ladle the curds and whey into the lined colander.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/homemade-feta-4.jpg"] - When all the curds are in the colander, draw all 4 corners of the cheesecloth together to form a bag and tie in a sturdy knot. Hang the bag over the sink or a bowl or pot so it can drain freely.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/homemade-feta-5.jpg"] - Let the cheese drain at room temperature for 3-4 hours, carefully lower the bag into the colander and untie the bag. At this point, the cheese will be smooth on the bottom and spiky on top.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/homemade-feta-6.jpg"] - Flip the curd over so the spikes are at the bottom, retie and rehang the bag. Let it drain for 24 hours.
Here is where you're going to notice a certain stank coming from the vicinity of your cheese. That's okay. It means you're on the right track. Don't back down!
- After 24 hours, lower the cheese, untie the bag and put the curd onto a sterilized cutting board. Cut it into blocks. I usually aim for pieces that are about the size of a deck of cards but about 2 inches thick.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/homemade-feta-9.jpg"] - Generously sprinkle all of the surfaces of the cut cheese with kosher salt then load the cheese into a sterilized, large, food-safe container with a tightly fitting lid.
[img src="https://www.foodiewithfamily.com/wp-content/uploads/2013/01/homemade-feta-10.jpg"] - Let the cheese rest at room temperature (DO NOT REFRIGERATE even though it is counterintuitive.) for 2 to 3 days so that it can continue releasing whey and hardening up. This will help it store longer.
To Prepare the Brine and Store the Cheese:
- Pour the whey the cheese has released into a sterilized large, food-safe container with a tightly fitting lid. Arrange the cheese blocks in it.
- Add the gallon of water and 1/2 cup of kosher salt to a non-reactive pot. Stir well over medium heat until the salt is completely dissolved. Let the brine come to room temperature before pouring it over the cheese. Put the lid in place tightly on the container and store the cheese in the refrigerator.
- Let the cheese age at least two weeks before eating. It is good for up to a year as long as it is kept submerged in the brine and refrigerated. It will continue to get stronger in taste as it ages.
Notes
Nutrition
Nutritional information is an estimate and provided to you as a courtesy. You should calculate the nutritional information with the actual ingredients used in your recipe using your preferred nutrition calculator.
did you make this recipe?
Make sure to tag @foodiewithfam on Instagram and #hashtag it #foodiewithfamily so I can check it out!
Reader's Thoughts...
Ole says
“1/4 teaspoon lipase powder if using cow milk Omit for vegetarian cheese. Lipase is animal derived.”
Unlike the Cow Milk? 😛
Rebecca says
Animal PART derived vs. extracted from the live animal leaving the animal alive. 😀
Linda says
Can this recipe be halved?
Rebecca says
I cannot see any good reason not to halve it if you’d like. 😀
Carrie says
I just made this recipe and it came out exactly like your photo and a friend of mine said it was no good because of the holes?? I googled and found possible bacteria issues?
Marianna says
Hi
Can you offer any advice as to why I’m not getting any curds?
I halved your recipe and am using mesophilic culture and lipase with store bought cows milk.
I’ve followed all instructions and it’s just been resting 40 mins with the rennet.
Thanks
Rebecca says
Hi Marianna-
Could you look over your jug of milk carefully? If it isn’t forming a curd, I am wondering whether it’s ultra pasteurized. If it is ultra pasteurized, it will not form a curd.
Marianna says
Hi Rebecca
Does the milk need to be kept at 86-88 for the whole time? Like when you add the rennet?
Lee Kennedy says
Making this at the moment. So far so good. Great expectations.
What’s with the kosher salt nonsense? Salt is salt.
Rebecca says
Salt is not just salt when it comes to cheesemaking and canning. Iodine (in table salt) has adverse effects in cheesemaking. I wouldn’t make that substitution.
Lee Kennedy says
Thanks Rebecca. I take your point on iodine. I am using salt. Plain salt. No iodine. No free- flowing agents. No trace residues of the Hymalayan alps. Not even the wildly diverse soup that is sea salt. But I have never enquired as to its religious affiliations. It is gluten-free though. Possibly not free-range. Perhaps it is an Australian – American thing. Like miles and kilometers.
On a serious and technical front, my feta is quite rubbery at this stage (Day 1). Commercial feta tends to be quite crumbly. It that a time thing?
Rebecca says
It is a time thing -in part- and should clear up as your feta ages and brines. Perhaps the salt discrepancy is a cultural thing. Most people here in the states refer to iodized salt as plain or table salt. That’s why I specify kosher. It doesn’t mean “big k” Kosher, but refers, instead, to a salt with a larger grain size and no added iodine which can be used for koshering meat if your religion requires you to do so! Mine does not, but I find I have better control over my final product with the larger grains and since a tablespoon of kosher salt can weigh much less than a tablespoon of table salt (due to grind size) I am careful to specify the use of kosher salt in many of my recipes. I’ve been lectured more times than I can count on end products being too salty by someone who used the wrong grind of salt and subsequently ended up with a salt lick. 😀
Lee Kennedy says
Thanks for that. I suppose the equivalent here is ‘cooking salt’.
As an analytical chemist in real life I much prefer to be given weights. Some of the on-line units can be a real puzzle. (A stick of butter?, Half a can?).
Phil Eversman says
I see no reason why plain pickling salt wouldn’t work. It is just plain salt with no additives like iodine or silica.
Rebecca says
Hi Phil- I answered the whys and wherefores above in detail, but in short, different grinds of salt actually measure differently by volume. Morton’s coarse kosher salt is what I used in the recipe, so it is important for me to specify that so someone doesn’t -for instance- use a finer grind salt thereby getting far more salt per tablespoon and wonder why they have unpalatably salty feta.
Linda says
Lee, with regard to recipes calling for kosher salt (larger flake, less volume than table salt) while you cannot switch measure for measure, you CAN replace the weight of the kosher salt with the equal weight of another salt without rear of over-salting
Michelle says
Love the step by step instructions! Thank you for sharing! The pictures help a lot. It takes a long time to make a bit of Feta but I feel bad to have all this milk and not doing anything with it!
I have made a batch of Feta without culture or Ca+ (don’t have any available…waiting on being delivered) I have used fresh raw goats milk and rennet only. 12L….almost 2.5kg outcome. I find the curds to be not as firm. Long story short once drained for 24hr and cut into moderate pieces the cheese feels rubbery and squeaky. I have aged it with salt for 3 days at room temp (22C..24C) and it kind of shrinked on me. After i placed in brine and aged in the fridge for few days i though i would taste it to see how it holds. The squeak is still there..but a lighter squeak. Definitely not firm as it would be the one bought from the store. I did not use a press.
Would you happen to know firstly why rubbery and secondly why squeaky? I absolutely love the test though…..not too salty and more than a mild flavor but nit too goaty…if you know what I mean.
Thank you in advance!
Rebecca says
Hi Michelle- I have never made it without the culture, so I’m not sure. In the past, squeaky curds have been a good indicator that I could make a harder cheese than feta, like a cheddar, with good results.
Alison Webster says
I made this cheese once several months ago and am on my second round – I think it’s so cool 🙂
One question that might be kinda silly is, how should I wash the cheesecloth? I think I put it inside a delicates bag in the regular wash last time, and this batch of cheese has a few little bits of lint on the outside where it was in contact with the cloth. Tips?
Rebecca says
That is a good question, Alison! I usually rinse my cheese cloth with cold water first to remove any big particles. Then I soak in cold water an hour or so, rinse until clear, then plunk into boiling water to sterilize. After that I pin it up and air dry and it is good to go!
Alison Webster says
Thanks Rebecca!
Rae says
I love this recipe. I tried this one 1st with fairly good results and then tried several other recipes that produced less than desirable results. (2) Two tips I can offer: 1) Allowing the milk to reach nearly room temperature prior to opening them up AND then adding them to the pot into a sink filled with water works the best. When making cheeses where the temperature is low like when making Feta, cream cheese, etc. I have found it’s easier to just skip using the stove completely. 2) Use the whey to make your brine instead of water and salt. Since doing this I have had absolutely no problems with slimy or soft feta.
Amy says
I can’t wait to try this but want to make sure I have the right sizes of a pot and jars. I’ll need a pot to hold three gallons of milk, and 2-1 gallon mason jars? If I’m reading correctly, I transfer to a new jar after the 2-3 day wait, after it’s cut into pieces, while it firms up. Is there a reason we don’t keep it in the same jar and add the brine? Does the final quantity of cheese fit into a gallon jar? Thank you for this recipe!
Rebecca says
Hi Amy-
One jar ought to do it for you… The container I used for aging at room temperature was a plastic food safe container and I transferred the cheese and brine to a glass jar for longer refrigerator storage. There is no need for a second one. All of my cheese fit into one jar quite nicely! It’s never a bad idea to have an extra quart jar or two handy in case of overflow, though!
Gwendelen says
I am on about 1 day of the two to three day room temp aging and so far i am absolutely thrilled with the result. It looks, smells and tastes like feta, although a little on the mild side as to be expected.
I have two questions. The first is that the feta is slightly drier than I expected. Not super dry or super crumbly, but I expect as it continues in the salt, it will become more dry. If I had cut the curds a little larger, would this have made it a little creamier?
My second question is this: after hanging and then slicing, I salted and placed it in a 9×13 Pyrex pan. If the next step is to move both the cheese and the whey into the container that I am going to brine it in the fridge in (I have a gallon size jar in mind) is there any reason I couldn’t have just put it in the jar to start with, left the whey in and topped it off with the brine all in the same container that I am planning on using for long term storage? It seems like an extra step but maybe I am missing something. Perhaps exposed surface area is important? (Despite being in an airtight container?)
This was a spectacular post. I had a wonderful time doing this project with my son who is ten. The directions were clear and staightforward and anticipated questions that we had. I’ve encouraged him to do something with cheese for his school science fair based on this project. Thank you for all the effort you clearly put into this post.
Rebecca says
Hi Gwendelen!
You might find them a touch more moist if you made the curds larger. I will say, though, that the homemade, in my experience, tends to be a little drier than the commercial version.
Now, addressing your excellent question about why it doesn’t go straight into the jar instead of having the whey separate out first. The reason for this is that you need to firm the curd up before floating it in the brine. It has a distressing tendency to disintegrate when it goes straight into the brine. The exposure to air, the time allowed to expel the whey, all these things help firm the curd so it can hold up to the loooooooooong time it will spend in the brine.
I am so glad you enjoyed the post and that you made the cheese with your son! That makes my heart VERY happy!!! The beauty of a food based science project is that it can be eaten when all is said and done. That is all kinds of win win!
…and if you liked the highly detailed nature of this post, you might also enjoy the Guaranteed Crispy Baked Sweet Potato Fries post I did! More edible science!
Amy says
I can’t wait to try this but want to make sure I have the right sizes of a pot and jars. I’ll need a pot to hold three gallons of milk, and 2-1 gallon mason jars? If I’m reading correctly, I transfer to a new jar after the 2-3 day wait, after it’s cut into pieces, while it firms up. Is there a reason we don’t keep it in the same jar and add the brine? Does the final quantity of cheese fit into a gallon jar? Thank you for this recipe!
Nathan Swain says
My only complaint is that I wish the article would have called out the fact that ultra pasteurized milk was a “thing” and not good for making cheese. As a first time cheese making attempt, I had no idea I should be on the lookout for that – just had to pour a $60 batch of goat milk down the drain (goat milk is not cheap at Natural Grocers) because in attempting this, I couldn’t figure out why the rennet wasn’t working (after an hour), and then discovered after painstakingly reading through the comments, that ultra pasteurized milk isn’t good for making cheese. Oh well, I should have done more research before attempting, but alas.
Recommendation – amend the article to say “Warning! – Do not not use Ultra Pasteurized milk (the most common milk found anywhere) because “… Hopefully that will prevent other newbies from wasting hours and money.
That said, I will attempt this again, pending more online research to ensure I’m not missing any other important caveats for cheese making.
Nathan Swain says
One more thing – in no way am I blaming your article for my mistake – I should have absolutely done more research. Your site was just the first that I went to when looking to make feta (my absolute favorite cheese) and I didn’t know ultra pasteurization was something to be aware of and avoid – merely suggesting to call it out for the people like me who are absolute beginners and don’t know their stuff. I look forward to another attempt.
Rebecca says
Hi Nathan- It is very difficult for a blogger to foresee every possible misinterpretation of a recipe. I would’ve been frustrated, too, to lose $60 worth of ingredients, but I am also very cautious by nature when making an investment of that magnitude in food. Since the clarification exists twice over in the comments section, I am comfortable with leaving the recipe as is. I wish you the best of luck on your next go round. Maybe you’d like to give it a shot with some cow’s milk and lipase first because that is a far less costly attempt and no less delicious!
Rebecca says
I have to say, maybe it’s because I live in dairy country, but ultra pasteurized is the exception rather than the norm in my area. Regular pasteurized milk is plentiful (and the goat’s milk I use is generally freshly milked from friends’ goats, and is therefore not at all pasteurized!)
ilene says
I have a fried who stores her cheeses in oil. Would that work? is it safe? I see people here mention buying feta cheese in oil. Let me know if you could.
Rebecca says
Hi Ilene,
I’m afraid I don’t have enough knowledge to tell you whether or not that is considered acceptable practice with cheese.
Richard says
Thank you so much for the recipe for feta cheese. My mother used to make feta, and yogart and other delightful foods. As a former chemist, microbiologist and daughter of Lebanese parents, she would sterilize our kitchen and bannish everybody from it for about a day while she made feta and other cultured products. She usually made enough feta and yogart to last for a couple of weeks, including a thick and tart tasting yogart being marketed today under the name Greek yogart — another prohibitively expensive food item that is inexpensive to make. Thank you again — and wish me luck.
Stephanie says
I’ve had my feta salted and resting at room temp for a little over 2 days, I looked at it today thinking I would get it ready for the brine and I found a few peices have mold on them!! I think maybe there was not enough salt? My question is, do I have to toss the whole batch or just the pieces with mold? Or can I cut or wash off the mold and keep the cheese? I’m not sure what is safe but I would hate to give up the whole batch 🙁
Rebecca says
First, look at the colour of the mold. Is it blue or green? Just cut it off and brine the rest of the cheese!
Stephanie says
No blue or green, just white/grey. I ended up tossing a few pieces, cutting off the rest of the mold, rinsing the cheese with brine and then covering it with new brine and putting it in the fridge. Do you think I didn’t use enough salt initially?
Rebecca says
There are a couple of possibilities. You could be in a very humid area which is going to encourage that to grow more quickly or the salt may have been too scant. Either is possible. Your cheese should be fine in the brine!
tarah says
I made my first batch and now is in the brine. I cut my pieces way too small (bite sized blocks) but I fished one out of the brine after 2 days and the outside has become squishy and slimy. Did I do something wrong? I let it sit in the salt for 3 days. I followed everything to the letter. Weird. Still tastes good.
Rebecca says
It’s the small cuts that probably did you in there, Tarah. It’ll still taste good, but it’s going to deteriorate in the brine far more quickly when it’s tiny.
Sara says
This is super. Made it for the second time, no problems either time. Chunks and chunks of feta instead of paying $3-4 for about a half cup of crumbles. And it keeps so well, too. We have a cow, so are always looking for things to do with the milk, and when we can duplicate a product we would otherwise have to buy, we’re thrilled!
Jen says
I am severely lactose intolerant
Jen says
Lets try this again, my tablet was misbehaving.
I am severely lactose intolerant. One of the things I miss the most is feta. I’ve been unable to find a lactose free version. If I can make this with lactose free milk I would be in heaven. I can drink cow milk to which lactase has been added to breakdown the sugars to a form my body can digest. (Lactaid brand etc). All of the commercially available lactose free milk is “Ultra Pasteurized”. Do you have any thoughts/suggestions regarding using ultra pasteurized lactose free milk? Do you think it would work?
Rebecca says
Hi Jen- I’m afraid I have some bad news for you on the ultra pasteurized front. Most cheesemakers, myself included, would advise you against using ultra pasteurized milks because the fats have been broken down to such a degree as to be impossible to draw together when the rennet is added. When I have attempted making mozzarella from ultra pasteurized milk, it has failed completely, yielding something that was still so loose, I couldn’t even strain it and make ricotta from it. That being said, I haven’t tried making it with lactose free milk, and I’m curious.
I’m always for experimenting where budget allows. If you are the intrepid sort, you could try quartering the recipe and attempting it with the lactose free milk. If you DO decide to try it, please check back in and let me know how it goes!
Marti says
My feta is on the 24 hour drip stage. I would like to season my feta with Greek basil and garlic. At what stage should I introduce the spices? Thanks!
Rebecca says
Hi Marti- I have not tested adding the spices, but I think (and again, this isn’t tested!) I’d probably toss the cheese with the basil and feta before serving. If you add them before brining, I’m afraid they’d just wash off.
Janice says
Hi there – can you tell me why my feta would be rubbery rather than crumbly?
Rebecca says
Hmmmmmmmm. Let me look into that for you, Janice. It should still be edible even if the texture is a little funny…
Janice says
yeah you right it is edible… but not like fetta should be – I look forward to your answer, although I am sure there could be lots of reasons.